Frame Machine Repair Company, LLC

My name is Randy Powers, and I've spent the better part of 22 years working on Frame Machines rebuilding hydraulic components. During this time I kept seeing the same pattern: Failed hydraulic components, and a concerned customer who wants to know why it has failed after a relatively short time in service. Based on what I saw after tear-down, I would explain the cause of failure; High contamination levels and wrong oil viscosity.

Here at Frame Machine Repair Company we cannot stress the importance of maintaining your equipment in a timely manor. Your Frame Machine was a major investment, and a Body Shop is a very dirty environment. As a result, modern hydraulic equipment is not only more expensive to fix when it breaks, but regular maintenance is imperative to maximize service life and minimize operating costs. It is not realistic to expect (as many equipment owners do) to run a hydraulic machine for 2,000 hours without checking anything more than the fluid level and not have any problems. An effective maintenance program requires time, effort, and some expense to implement. It is, however, cost-effective.

The investment is quickly recovered through savings as a result of improved machine performance, increased component life, increased fluid life, reduced downtime and fewer repairs. So if you own a Frame Machine, and are serious about minimizing your running costs, and your current maintenance practices are unsophisticated or non-existent, call Frame Machine Repair, and start implementing a maintenance program today. We offer a comprehensive 12 point full service tune-up to keep your machine operating at its peak performance level. Here is what we do,

Grease pulling Tower Heads and all zerk fitting’s.
Inspect Tower alignment and ease of movement and tighten if necessary
Level Machine
Inspect lift assembly and adjust safety ramps
Inspect tower heads, collars, and roller’s
Change hydraulic fluid in reservoir and adjust solenoid.
Clean filter system
Inspect, clean and adjust pump components
Inspect, clean and adjust relay points as needed
Inspect all electrical cords and control switch for damage.
Pressure test pump for leak back
Pressure test complete hydraulic system for leaks.

If additional service is needed, we will provide you with an estimate of labor and parts before any additional work is done.

SPECIALS